Mounting artwork on paper

Cut eight strips of self-adhesive linen hinging tape, about two inches long. It might be necessary to clean the glass two or three times. Score the plastic spacer with your wire cutter. Do this for all four corners. Archival linen hinging tape to attach the artwork to the backing board.

Press the artwork into the frame. Dual point driver and points: Use a small ruler to measure and mark both side edges of the frame correspondingly. Basic Framing Materials and Tools Frame Bone or plastic paper folder and scorer to smooth the mat board cuts White emery board Microfiber cloth--use a lint-free cleaning cloth Craft paper for sealing the back of the frame from dust Archival double-sided tape or other adhesive D-rings and small screws to hold the hanging wire Cordless screwdriver or drill to secure the D-rings Mounting artwork on paper wire to hang the fame Backing board: Measure the interior of the frame and cut the self-adhesive spacers to fit snugly inside the edges of the frame.

Press the driver down on the spacers and then into the frame. Attach the D-rings using small screws. Use a dual point driver and fresh dual point tabs to hold the boards in position. Double-check your measurements with a ruler. Double-stick adhesive tape makes this process easy.

In a pinch, you can use a heavy-duty staple gun and some type of fastener from a hardware store. Avoid gaps between the spacer ends at the corners.

Loop the wire across the back for hanging. Use a ruler to measure the spacer length and mark it with a Sharpie pen. Clean the glass, using Invisible Glass and the lint-free cloth. Preparing the Frame for Hanging With the back side of the frame facing up, make a mark less than halfway from the top along the side edge.

This is a very common way of mounting your artwork when you do not want a mat to cover the edge of the paper. A paperweight with a felt back will do as well. Trim the edges of the paper with a box cutter.

Mounting Systems

Then press in the second piece of backing board in place. Clean and Assemble the Frame Pull the dual point tabs out of the back of the frame using pliers. Another option is to partially assemble your piece and then take it to a framing shop.

Float Mounting Introduction Float mounting creates a seamless presentation. Put your name on the back. They come in lengths of about six feet and can be easily purchased in frame supply stores.

Gently lift the corner of your artwork.Float mounting creates a seamless presentation.

Float Mounting

With "float mounting," the artwork will look like it's hovering or floating over the backing board. This is a very common way of mounting your artwork when you do not want a mat to cover the edge of the paper. Mounting.

Mounting is the process of stretching and reinforcing artwork done on rice paper with a stronger paper involves getting the entire painting wet with paste and backing it to another paper to create a finished masterpiece.

Float mounting is a framing technique that's guaranteed to add dramatic flair to watercolors, old maps, handwritten letters, timeworn documents, and artwork on textured paper.

Try these easy-to-follow steps for float mounting treasured documents. Next, adhere the paper to the wood surface, and cover the artwork/wood piece with a clean sheet of paper as a protective barrier.

Using your palm, press firmly over the entire surface to remove any air pockets. Custom mounting of art includes drawings, oil paintings, watercolors, prints, photographs, digital prints on paper, and paintings made on canvas and linens.

Art on paper can also be mounted on canvas or linen and stretched over conventional canvas stretcher bars or mounted to our archival panels. How have standards and options for framing works on paper changed in recent years?

I think the standards have always been, first, to protect the work as much as possible and, second, to make sure that anything done to the work on paper in the framing process is as reversible as possible.

Mounting artwork on paper
Rated 3/5 based on 28 review